상품명 | [#OP-01] [5개] 3D Printed Suspension Block Lift +3mm (for Mini-Z 4x4 바디 리프트) |
---|---|
제조사 | 기타 |
상품코드 | OP-01 |
판매가 | 11,500원 |
적립금 | 115원 (1%) |
SNS 상품홍보 | |
---|
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드수량을 선택해주세요.
위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.
상품명 | 상품수 | 가격 |
---|---|---|
[#OP-01] [5개] 3D Printed Suspension Block Lift +3mm (for Mini-Z 4x4 바디 리프트) | 11500 (115) |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
■구성품 : 서스펜션 블록 4개 + 여분 1개
■특징
- 차대 높이 약 +3mm
- 3D 프린트 제품
- 기본 스크류 사용
- 두개를 겹쳐서 장착(+6mm) 시 스크류 교체 필요
- 서스펜션 링크 길이 조절이 필요할 수 있음 (로드엔드로 휠베이스 조절)
■주의사항 : 고온에 노출되면 블록이 녹거나 뒤틀릴 수 있음
Suspension Block Lift for Kyosho Mini-Z 4x4 Toyota 4Runner, Jimny, Jeep Crawler
Description :
These are 3D Printed parts to raise the chassis approximately 3mm per block set, this can help provide clearance for different wheels/tries or more suspension articulation.
1 block under each spring mount you can use the stock screws.
If you get multiple sets and use 2 or more blocks per spring mount then you will need to find longer screws.
The links are adjustable and you may need to let the links out a little to keep the wheel base the same but not other modifications are needed.
Notes :
These items can warp and melt in hot sun or left in hot places like a car or attic, use caution!
Included :
5 suspension blocks (4 to use and 1 for spare)
*Photos are for reference only
상품의 사용후기를 적어주세요.
게시물이 없습니다
상품에 대해 궁금한 점을 해결해 드립니다.
게시물이 없습니다